Pneumatic thermal cutter
Model: RP-30ATD
Category: Equipment and Materials
Exhibitor: R PLUS TECHNOLOGY CO., LTD.
Booth No: L401
Characteristic
Rplus pneumatic thermal cutters are designed for plastic molding and specified configuration. A designed pair of thermal knifes with a suitable heating rate, the unique design will reduce the heating time and reach the setting temperature in few seconds. The shearing is driven by a dual rod cylinder with 0.15~1Mpa range pressure.
Knifes are made by alloy special steel with heat-treatment. The heating capacity is 150W within 8mmx35mm heating bars , the range is 60~350C. The dual rod cylinder drives the thermal knifes will lead to a stable shearing effect, as well as higher efficiency, reduce the loss, faster shearing and depends on different type of plastic can be set variable heating temperature.
For modern manufacturing, we can integrate on a robot arm and automatically processing line.
Examples of widely application as head lamp of automobile,optical lens, acrylic products and Polycarbonate,etc. We forward to offer a safer , easier and efficiency tools.
Other Products
-
VALVE Island, Common Kit Combinations
-
180 degree reversing clamping cylinder
-
RSC Standard Cylinder
-
RVBA PRESSURE BOOST
-
Electric gripper
-
OQC quick mold change device series
-
AUTOMATIC AIR SCISSORS SERIES
-
RITV Electro-Pneumatic Regulator Series
-
R Series Rotary Actuated Air Gripper
Products you may be interested in
-
FPC Flexible Display
-
XTPL High-Precision Printing System
-
Copper Foil sputtered Graphite Thermal Film
-
Laser Dumping Application System
-
Semiconductor Digest Quartz
-
Multi-mode Optical Fibers/Reflection Probes/Bifurcated Fibers
-
Laser Lift Off Application System
-
Spin Coater/Developer
-
MOCVD System
-
Roll to Roll Sputtering OEM Service
-
Customized roll-to-roll sputtering of flexible electrode materials
-
E-Beam Evaporator
-
Ultra Thin 2Layer FCCL
-
Glass Circuit Board
-
Compound Semiconductor Etching System
-
Micro/Mini LED encapsulant glue
-
TCP150 High Replication Embossing System
-
Industrial Type Six-Axis Robots
-
UV LED Curing System
-
Micro LED Laser Application Lab rental
Highest Rated Products
-
ITO Patterned Glass
-
Industrial Type Six-Axis Robots
-
GMT_Actuators-GKA/GKS
-
Ө axis Precision Rotary Stages EXYR
-
Six-Axis Optical Fiber Alignment Stage Module
-
Electric Cylinder GESC
-
Linear Motion Components
-
K-SERVO SERVO DRIVE
-
GMT_Electric Gripper-Two Fingers-GEA-P2/GEA-A2/GEA-P3/GEA-A3/GEL-P2/GEE
-
GMT_Motorized Precision Positioning Stage-AX-F
-
GMT_Precision Ballscrews-Flanged Ball Nut-BS0805D3
-
GMT_Precision Manual Positioning Stage-Multi-Axis-MXYR-A
-
10-inch and 27.6-inch cholesterol liquid crystal panels
-
Infinity display
-
Desktop AFM (Atomic Force Microscope)---the first choice for R&D and quality control with high CP value
-
World No.1 German Accurion Active Shock Absorber----Powerful, High Quality, High CP Value
-
Handheld AFM (Atomic Force Microscope)---Introduction Tool for Nanometer Measurement
-
Simple, high-efficiency passive isolation table----USA high-tech company "Minusk"
-
Various styles of cost-effective AFM probes / ultra-fine 2nm probes
-
Wafer type atomic force microscope AFM (applicable to 6-12 inches)
-
CSI AFM/Best electrical measurement AFM in the world(Ultra High Resolution PFM/KFM/EAFM/CAFM) Surface Potential Measurement
-
Multifunctional high-performance AFM (roughness, film thickness, surface potential, wafer defect detection)
-
Ｗhite light interferometer＋Scanning Confocal Microscopy
-
Micro LED Laser Application Lab rental
-
Laser Dumping Application System
-
Laser Lift Off Application System
-
Apacer ChLCD e-Paper Signage
-
UV LED Curing System
-
27 inch Ultra-thin Minitor with Mini LED Backlight Plate in Glass Substrate
-
P1.25 Direct-view Display Light Plate in Glass Substrate for 220 inch in-house Direct-view Display
